Quick Ship
In-Stock Wood Door Inventory
Click here

Click here for the continuation of this page >>>

Product Features And Specifications	Interior Only (1)
Thickness	1-3/4"	Previous Page >>> Marshfield DoorSysterns Structural Composite Lumber Doors allow for the flexibility of flush doors to full light doors with full warranty and without the standard light lock restrictions. They represent a combination of appearance and performance that makes them suitable for a wide variety of architectural applications. Note: These doors are tested for neutral pressure.
Maximum Size	DCL-1: Single: 4/0 x 8/0 Pair: 8/0 x 10/0 DCL-20: ITS-WH & UL: Single:4/0 x 10/0Pair:4/0 x 10/0 (7) Double Egress Pair:8/0 x 8/0 (7)
Minimum Size	0/8 x 1/10 (6)
Face	Wood veneer or Medium-Density Overlay (MDO)
Crossband	Engineered fiber
Stiles	1/2" minimum, stile species matching/compatible with face veneer Option: Veneer band
Face Assembly Adhesive	Type I (waterproof)
Core Assembly Adhesive	Type II (water-resistant)
Core	Structural Composite Lumber (SCL) [Laminated Strand Lumber (LSL)]
Maximum Size of Light Openings (2) dimension	DCL-1: (8) Total area of openings not to exceed 2835 sq. in. of visible glass or one continuous of 81 " in height or one continuous dimension of 38" in width DCL-20: (9) ITS-WH & UL:  Single, Pair & Double Egress Pair:   Total area of openings not to exceed 1296 sq. in. of visible glass or one continuous dimension of 54" in height or one continuous dimension of 30" in width  DCL-20:(9,1 0) ITS-WH & UL:  Single, Pair& Double Egress Pair:   Total area of openings not to exceed 2835 sq, in. of visible glass or one continuous dimension of 81" in height or one continuous dimension of 35" in width
Light Mouldings	W-2, W-3, W-6 or W-7 for 5/16", 1/4" or 3/16" glass only and a maximum nail spacing of 6" or Metal Vision Frames. Factory glazing available upon request.
Stile and Rail (4)	Minimum 5"
Minimum Distance from Adjacent Locks and Light Cutouts	1-1/4"
Other Detail Work (12)	Factory fitting and machining. Factory standard louvers and applied moulding
Factory Finish	Clear or stain with satin gloss Enviroclad UVTM finish  Prime only Opaque with flat gloss topcoat (3)
Warranty	Full; life of original installation (1)
Security Rating	Class 40 (5), highest security rating possible
(1) Use of Marshfield DoorSystems doors in exterior applications is not recommended and not warranted.  (2) Marshfield DoorSystems does not assume responsibility for the choice of glazing materials used. Refer to consumer Product Safety Commission 16 CFR 1201 CAT. 11 (1-1-97 Edition) to determine the need for safety-rated glazing. (3) All colors may not be available.  (4) Minimum stile and rail dimensions may not be applicable with certain hardware options.  (5) Per UBC standard 41-1 and ASTM F-476.  (6) Either the width or length dimension must be at least 22" if the other dimension is less than 22". (7) Fire retardant stiles eliminate the need for metal edge and astragal.  (8) Minimum 5" between adjacent light or louver cutouts or light or louver cutouts and door edge.  (9) Minimum 5-1/2" between adjacent light or louver cutouts or light or louver cutouts and door edge. Note: Marshfield DoorSystems doors are manufactured per the standards listed. Specifications are subject to change without notice.

CopyrightŠ 2002 by Columbus Door Company. All rights reserved. Sitemap